I´ll write you here instruction how to swap your hard disc in PS3, i know, that for people from Europe it´s too early, but if you are from country, where was PS3 launch you can use it.
1.Co budeme potřebovat?
- Kód: Vybrat vše [Otestovat Linky]
HDD (2.5", SATA)80Gig,120Gig,160Gig,200Gig(Toshiba)
Phillips and slottet head drivers (+ and -)
2.Vypněte konzoli, položte ji na bok a oddělejte kryt-jako na obrázku:
3.Oddělejte modrý šroubek, který je vidět na obrázku:
4.Držák převraťte doprava a nahoru.
5.Odšroubujte 4 stříbrnné šroubky po stranách.
6.Použitý model: Seagate's ST920217AS.
7.Do prázdného místa po vašem původním disku vložte disk nový a přišroubujte ho. Musíte jej pořádně zastrčit až bude cítit, že je dokonale spojen vevnitř.
8.Restartujte konzoli a až vám naběhne obrazovka zda použít HDD zvolte ano.
9.Vás původní PS3 hard disk by měl být úspěšně vyměněn.
English instructions:
Replacement HDD (2.5", SATA)80Gig,120Gig,160Gig,200Gig(Toshiba)
Phillips and slottet head drivers (+ and -)
1.Turn of the console, lay it on its side, and open the lid labeled "HDD"
2.Remove the blue screw once the lid is open.
3.lift the handle and slide it to the right gently.
4.Remove the 4 silver screws from the sides
5.The model of HDD is Seagate's ST920217AS.
6.Install the Replacement HDD back onto the frame, screw it back, and slide the HDD back into the console.
Slide it to the left until you can feel that it's been connected. Screw the blue screw back in, and close the lid.
7.Restart the PS3, and the console will ask to Format the HDD. Choose "Yes".
8.Replacement HDD is recognised instantly.












